ROOFLANTERNREPAIRS.co.uk

Clwyd · CH7

Flat roof junction and flashing repairs in Mold

If you're in Mold and dealing with a leak where the roof meets the lantern, we can help. We re-make the membrane, trims and flashing where the flat roof meets the lantern kerb, and confirm the fixed price in writing before we start.

We carry out flat roof junction and flashing repairs in Mold and across the CH7 area. The junction where the flat roof covering meets the lantern kerb is a weak point on many extensions.

Newly trimmed flat roof junction and flashing tape around a roof lantern kerb

What you might be seeing

  • Splits, blisters or lifted edges in the roof covering by the kerb
  • Missing or loose edge trims and flashings
  • Ponding on the roof next to the lantern

What usually causes it?

Cracked GRP

Fibreglass roofs can crack at the kerb corner where movement concentrates.

Missing trims

Without a trim or flashing to protect the top edge, water gets in behind the membrane.

About Mold and the CH7 area

Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.

Mold is around 10 miles from Wrexham, and both are within our Clwyd coverage.

Neighbouring places we cover include Buckley (2 miles), Deeside (5 miles), Flint (5 miles).

How much should it cost?

Guide price, per lantern£245–£695 ex VAT£294–£834 inc VAT

Most flat roof junction and flashing repairs jobs come in between £245 and £695 ex VAT (£294–£834 including VAT), per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in Wales?

Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in Wales. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010 (as applied in Wales); we confirm in writing which route applies before any replacement. Listed buildings in Wales need listed building consent from the local planning authority for alterations, with Cadw guidance on historic buildings; check with the council before changing a lantern on a listed property.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Flat roof junction and flashing repairs in Mold: questions

Do you cover Mold?

Yes. We cover Mold, including the CH7 postcode area, as part of Clwyd. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.

Which places near Mold do you cover?

As well as Mold, we cover nearby Buckley, Deeside, Flint, Ruthin and the rest of Clwyd.

Do you repair the whole flat roof?

We repair the area around the lantern. If the wider roof is failing we'll tell you and can quote, but we won't push a new roof if a local repair will do.

What does a junction repair cost?

Usually £245–£695 ex VAT, confirmed in writing before work starts.

Other lantern repairs in Mold

Flat roof junction and flashing repairs near Mold

More about flat roof junction and flashing repairs · All roof lantern repairs in Mold

Call freeGuide price