The junction where the flat roof covering meets the lantern kerb is a weak point on many extensions. Send photos from Ryde (PO33) and we'll tell you which it is — with the price agreed in writing before any work.
Signs you need flat roof junction and flashing repairs
- Splits, blisters or lifted edges in the roof covering by the kerb
- Missing or loose edge trims and flashings
- Ponding on the roof next to the lantern
What usually causes it?
Cracked GRP
Fibreglass roofs can crack at the kerb corner where movement concentrates.
Missing trims
Without a trim or flashing to protect the top edge, water gets in behind the membrane.
Roof lanterns in Ryde
Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.
Near the coast, salt in the air is hard on aluminium finishes and fixings; washing the frame occasionally and touching in chips keeps corrosion away.
We cover Ryde by arrangement: island work is planned around ferry access, and any travel or access costs are set out in your written quote before you commit.
If you're just outside Ryde, we also cover Gosport (5 miles), Sandown (5 miles), Portsmouth (6 miles).
Guide prices for flat roof junction and flashing repairs in Ryde
Guide price for flat roof junction and flashing repairs: £245–£695 ex VAT (£294–£834 inc VAT), per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Flat roof junction and flashing repairs in Ryde: questions
How do I get a price for flat roof junction and flashing repairs in Ryde?
Send a few photos of the lantern and the problem, with your Ryde postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Do you need to visit to price flat roof junction and flashing repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Do you repair the whole flat roof?
We repair the area around the lantern. If the wider roof is failing we'll tell you and can quote, but we won't push a new roof if a local repair will do.
Can you repair a GRP roof without it showing?
Repairs are colour-matched as closely as possible, but new topcoat next to weathered topcoat can look slightly different at first.
Other lantern repairs in Ryde
- Upstand and kerb repairs in Ryde
- Cracked lantern glass replacement in Ryde
- Slipped glass panel repairs in Ryde
- Opening vent and actuator repairs in Ryde
- Cleaning and maintenance in Ryde
- Roof lantern replacement in Ryde
Flat roof junction and flashing repairs near Ryde
More about flat roof junction and flashing repairs · All roof lantern repairs in Ryde