ROOFLANTERNREPAIRS.co.uk

Kent · CT16

Flat roof junction and flashing repairs in Dover

Flat roof junction and flashing repairs in Dover (CT16): we re-make the membrane, trims and flashing where the flat roof meets the lantern kerb. Start with a few photos by WhatsApp or the form and we'll come back with a guide price.

We carry out flat roof junction and flashing repairs in Dover and across the CT16 area. The junction where the flat roof covering meets the lantern kerb is a weak point on many extensions.

Newly trimmed flat roof junction and flashing tape around a roof lantern kerb

What you might be seeing

  • Leak near the lantern but not from the frame
  • Splits, blisters or lifted edges in the roof covering by the kerb
  • Ponding on the roof next to the lantern

Why it happens

Unbonded membrane

EPDM or single-ply that has come away from the kerb lets water run behind it.

Missing trims

Without a trim or flashing to protect the top edge, water gets in behind the membrane.

Covering Dover and nearby

Even in drier areas, one heavy downpour with blocked eaves is enough to overflow a lantern indoors. Clearing the eaves channel is the simplest prevention there is.

Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.

We cover Dover as part of Kent, about 36 miles from Maidstone.

Close by, we also cover Folkestone (7 miles), Deal (8 miles), Canterbury (15 miles).

How much should it cost?

Guide price, per lantern£245–£695 ex VAT£294–£834 inc VAT

Typical range: £245–£695 ex VAT, which is £294–£834 with VAT, per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Flat roof junction and flashing repairs in Dover: questions

Do you cover Dover?

Yes. We cover Dover, including the CT16 postcode area, as part of Kent. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.

Do you need to visit to price flat roof junction and flashing repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Do you repair the whole flat roof?

We repair the area around the lantern. If the wider roof is failing we'll tell you and can quote, but we won't push a new roof if a local repair will do.

Can you repair a GRP roof without it showing?

Repairs are colour-matched as closely as possible, but new topcoat next to weathered topcoat can look slightly different at first.

Other lantern repairs in Dover

Flat roof junction and flashing repairs near Dover

More about flat roof junction and flashing repairs · All roof lantern repairs in Dover

Call freeGuide price