ROOFLANTERNREPAIRS.co.uk

Shropshire · TF1

Flat roof junction and flashing repairs in Wellington

If you're in Wellington and dealing with a leak where the roof meets the lantern, we can help. We re-make the membrane, trims and flashing where the flat roof meets the lantern kerb, and confirm the fixed price in writing before we start.

The junction where the flat roof covering meets the lantern kerb is a weak point on many extensions. Send photos from Wellington (TF1) and we'll tell you which it is — with the price agreed in writing before any work.

Newly trimmed flat roof junction and flashing tape around a roof lantern kerb

What you might be seeing

  • Leak near the lantern but not from the frame
  • Splits, blisters or lifted edges in the roof covering by the kerb
  • Ponding on the roof next to the lantern

Why it happens

Unbonded membrane

EPDM or single-ply that has come away from the kerb lets water run behind it.

Cracked GRP

Fibreglass roofs can crack at the kerb corner where movement concentrates.

About Wellington and the TF1 area

Damp, mild winters keep moss and algae growing on flat roofs and lantern frames, which holds water against seals and blocks weep slots. Regular clearing makes a real difference in wetter areas.

From Shrewsbury to Wellington is roughly 10 miles — all part of the Shropshire area we cover.

We also cover nearby Telford (3 miles), Shrewsbury (10 miles), Bridgnorth (12 miles).

How much should it cost?

Guide price, per lantern£245–£695 ex VAT£294–£834 inc VAT

Most flat roof junction and flashing repairs jobs come in between £245 and £695 ex VAT (£294–£834 including VAT), per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Flat roof junction and flashing repairs in Wellington: questions

Do you cover Wellington?

Yes. We cover Wellington, including the TF1 postcode area, as part of Shropshire. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.

Do you need to visit to price flat roof junction and flashing repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Do you repair the whole flat roof?

We repair the area around the lantern. If the wider roof is failing we'll tell you and can quote, but we won't push a new roof if a local repair will do.

What does a junction repair cost?

Usually £245–£695 ex VAT, confirmed in writing before work starts.

Other lantern repairs in Wellington

Flat roof junction and flashing repairs near Wellington

More about flat roof junction and flashing repairs · All roof lantern repairs in Wellington

Call freeGuide price