We carry out flat roof junction and flashing repairs in Burgess Hill and across the RH15 area. The junction where the flat roof covering meets the lantern kerb is a weak point on many extensions.
What you might be seeing
- Leak near the lantern but not from the frame
- Missing or loose edge trims and flashings
- Ponding on the roof next to the lantern
Why it happens
Unbonded membrane
EPDM or single-ply that has come away from the kerb lets water run behind it.
Missing trims
Without a trim or flashing to protect the top edge, water gets in behind the membrane.
Covering Burgess Hill and nearby
Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
From Chichester to Burgess Hill is roughly 29 miles — all part of the West Sussex area we cover.
Neighbouring places we cover include Haywards Heath (3 miles), Hove (9 miles), Brighton (9 miles).
How much should it cost?
Most flat roof junction and flashing repairs jobs come in between £245 and £695 ex VAT (£294–£834 including VAT), per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Flat roof junction and flashing repairs in Burgess Hill: questions
Do you cover Burgess Hill?
Yes. We cover Burgess Hill, including the RH15 postcode area, as part of West Sussex. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
How do I get a price for flat roof junction and flashing repairs in Burgess Hill?
Send a few photos of the lantern and the problem, with your Burgess Hill postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Do you repair the whole flat roof?
We repair the area around the lantern. If the wider roof is failing we'll tell you and can quote, but we won't push a new roof if a local repair will do.
What does a junction repair cost?
Usually £245–£695 ex VAT, confirmed in writing before work starts.
Other lantern repairs in Burgess Hill
- Roof lantern resealing in Burgess Hill
- Ridge and hip repairs in Burgess Hill
- Solar control and self-cleaning glass upgrades in Burgess Hill
- uPVC roof lantern repairs in Burgess Hill
- Flat rooflight and skylight repairs in Burgess Hill
- Roof lantern replacement in Burgess Hill
Flat roof junction and flashing repairs near Burgess Hill
More about flat roof junction and flashing repairs · All roof lantern repairs in Burgess Hill