ROOFLANTERNREPAIRS.co.uk

Oxfordshire · OX16

Ridge and hip repairs in Banbury

For ridge and hip repairs in Banbury, the job is simple to describe: we repair, reseal or replace the ridge end cap and the hip junctions at the top of the lantern. Photos first, a guide price back, then a written fixed price.

In Banbury, as everywhere, the ridge is where the hip bars and glazing bars meet at the top of a lantern, usually under a moulded or pressed end cap. Send photos and we'll tell you what we think has failed.

Ridge end cap and hip bars at the top of an anthracite aluminium roof lantern

What you might be seeing

  • Drips near the centre or top of the lantern
  • A cracked or faded ridge end cap
  • Sealant around the ridge cap split or missing

Why it happens

Movement at the junction

Several bars meet at one point and each moves slightly with temperature; the seals at the ridge take the strain.

Poor original sealing

Ridge details are fiddly. If the original sealing was rushed, it's often the first place to leak.

About Banbury and the OX16 area

Leaf fall from garden trees is the most common cause of eaves overflow on suburban extensions. If your lantern sits near trees, clearing the eaves channel each autumn prevents a lot of drips.

Banbury is around 22 miles from Oxford, and both are within our Oxfordshire coverage.

Close by, we also cover Bicester (14 miles), Daventry (15 miles), Leamington Spa (17 miles).

What should you expect to pay in Banbury?

Guide price, per lantern£195–£445 ex VAT£234–£534 inc VAT

Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Ridge and hip repairs in Banbury: questions

Do you need to visit to price ridge and hip repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Can you repair a lantern someone else installed in Banbury?

Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.

What does a ridge repair cost?

Usually £195–£445 ex VAT for a standard lantern, confirmed in writing before work starts.

Can you replace just the ridge cap?

Yes, if a compatible cap is available and the seals underneath are sound.

Other lantern repairs in Banbury

Ridge and hip repairs near Banbury

More about ridge and hip repairs · All roof lantern repairs in Banbury

Call freeGuide price