ROOFLANTERNREPAIRS.co.uk

Somerset · BS48

Ridge and hip repairs in Nailsea

Dealing with a leak at the ridge in Nailsea (BS48)? We repair, reseal or replace the ridge end cap and the hip junctions at the top of the lantern, with a fixed price agreed in writing first.

The ridge is where the hip bars and glazing bars meet at the top of a lantern, usually under a moulded or pressed end cap. Send photos from Nailsea (BS48) and we'll tell you which it is — with the price agreed in writing before any work.

Ridge end cap and hip bars at the top of an anthracite aluminium roof lantern

Signs you need ridge and hip repairs

  • A cracked or faded ridge end cap
  • Sealant around the ridge cap split or missing
  • Staining along the hip bars inside

What usually causes it?

UV-damaged end caps

Plastic ridge end caps become brittle and crack, especially on south-facing lanterns.

Movement at the junction

Several bars meet at one point and each moves slightly with temperature; the seals at the ridge take the strain.

Covering Nailsea and nearby

Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.

From Taunton to Nailsea is roughly 32 miles — all part of the Somerset area we cover.

If you're just outside Nailsea, we also cover Portishead (3 miles), Clevedon (4 miles), Bristol (7 miles).

What should you expect to pay in Nailsea?

Guide price, per lantern£195–£445 ex VAT£234–£534 inc VAT

Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Ridge and hip repairs in Nailsea: questions

Do you cover Nailsea?

Yes. We cover Nailsea, including the BS48 postcode area, as part of Somerset. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.

Do you need to visit to price ridge and hip repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

My ridge cap is a different colour from the frame — does that matter?

Faded or chalky caps are a sign of UV damage. Colour alone isn't a leak, but brittle caps crack, so we check them.

Can you replace just the ridge cap?

Yes, if a compatible cap is available and the seals underneath are sound.

Other lantern repairs in Nailsea

Ridge and hip repairs near Nailsea

More about ridge and hip repairs · All roof lantern repairs in Nailsea

Call freeGuide price