In Holywood, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

What you might be seeing
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
About Holywood and the BT18 area
Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
From Newry to Holywood is roughly 38 miles — all part of the County Down area we cover.
We also cover nearby Newtownabbey (4 miles), Belfast (5 miles), Carrickfergus (5 miles).
What should you expect to pay in Holywood?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in Northern Ireland?
In Northern Ireland, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations (Northern Ireland) 2012, so we set out the route in writing first. Listed buildings in Northern Ireland need listed building consent from the council for alterations; check with the council's planning service before changing a lantern on a listed property.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Holywood: questions
Do you cover Holywood?
Yes. We cover Holywood, including the BT18 postcode area, as part of County Down. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Can you repair a lantern someone else installed in Holywood?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Holywood
- Roof lantern leak repairs in Holywood
- Solar control and self-cleaning glass upgrades in Holywood
- Timber roof lantern repairs in Holywood
- uPVC roof lantern repairs in Holywood
- Opening vent and actuator repairs in Holywood
- Leak investigation and inspection in Holywood
Slipped glass panel repairs near Holywood
More about slipped glass panel repairs · All roof lantern repairs in Holywood