We carry out slipped glass panel repairs in Consett and across the DH8 area. A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom.
What you might be seeing
- A visible gap under the capping at the top of a pane
- A leak at the top of one pane only
- A pane that looks out of line with the others
Why it happens
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
About Consett and the DH8 area
Colder winters mean more frosty mornings, and a roof lantern is often the coldest surface in a warm kitchen — so condensation is as common as genuine leaks. We check which you've got before quoting.
From Durham to Consett is roughly 11 miles — all part of the County Durham area we cover.
Close by, we also cover Stanley (5 miles), Chester-le-Street (10 miles), Durham (11 miles).
What should you expect to pay in Consett?
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Consett: questions
How do I get a price for slipped glass panel repairs in Consett?
Send a few photos of the lantern and the problem, with your Consett postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Can you repair a lantern someone else installed in Consett?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Consett
- Roof lantern leak repairs in Consett
- Roof lantern resealing in Consett
- Glazing bar and capping repairs in Consett
- Upstand and kerb repairs in Consett
- Timber roof lantern repairs in Consett
- Cleaning and maintenance in Consett
Slipped glass panel repairs near Consett
More about slipped glass panel repairs · All roof lantern repairs in Consett