A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Seaham (SR7) and we'll tell you which it is — with the price agreed in writing before any work.
Is it time for slipped glass panel repairs?
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
About Seaham and the SR7 area
Colder winters mean more frosty mornings, and a roof lantern is often the coldest surface in a warm kitchen — so condensation is as common as genuine leaks. We check which you've got before quoting.
We cover Seaham as part of County Durham, about 10 miles from Durham.
Neighbouring places we cover include Houghton-le-Spring (5 miles), Sunderland (5 miles), Peterlee (5 miles).
How much should it cost?
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Seaham: questions
How do I get a price for slipped glass panel repairs in Seaham?
Send a few photos of the lantern and the problem, with your Seaham postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Seaham
- Ridge and hip repairs in Seaham
- Flat roof junction and flashing repairs in Seaham
- Opening vent and actuator repairs in Seaham
- Leak investigation and inspection in Seaham
- Orangery lantern repairs in Seaham
- Commercial roof lantern repairs in Seaham
Slipped glass panel repairs near Seaham
More about slipped glass panel repairs · All roof lantern repairs in Seaham