ROOFLANTERNREPAIRS.co.uk
0800 088 6248 Get a guide price

Devon · EX2

Slipped glass panel repairs in Exeter

If you're in Exeter and dealing with a slipped glass panel, we can help. We lift slipped units back into place, fit proper setting blocks and stops and reseal the bars, and confirm the fixed price in writing before we start.

Get a guide priceCall 0800 088 6248

In Exeter, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

Is it time for slipped glass panel repairs?

  • A visible gap under the capping at the top of a pane
  • A leak at the top of one pane only
  • A pane that looks out of line with the others

What usually causes it?

Missing setting blocks

Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.

Failed glass stops

Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.

Covering Exeter and nearby

Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.

Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.

Neighbouring places we cover include Exmouth (9 miles), Tiverton (12 miles), Newton Abbot (14 miles).

Guide prices for slipped glass panel repairs in Exeter

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Exeter: questions

How do I get a price for slipped glass panel repairs in Exeter?

Send a few photos of the lantern and the problem, with your Exeter postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.

Do you need to visit to price slipped glass panel repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

What does resetting a slipped panel cost?

Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.

Can a slipped panel be pushed back up?

Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.

Other lantern repairs in Exeter

Slipped glass panel repairs near Exeter

More about slipped glass panel repairs · All roof lantern repairs in Exeter

Call freeGuide price