In Aberystwyth, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.
What you might be seeing
- A visible gap under the capping at the top of a pane
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
About Aberystwyth and the SY23 area
Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.
Near the coast, salt in the air is hard on aluminium finishes and fixings; washing the frame occasionally and touching in chips keeps corrosion away.
Aberystwyth is around 40 miles from Carmarthen, and both are within our Dyfed coverage.
If you're just outside Aberystwyth, we also cover Machynlleth (16 miles), Dolgellau (24 miles), Llandrindod Wells (32 miles).
What should you expect to pay in Aberystwyth?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in Wales?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in Wales. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010 (as applied in Wales); we confirm in writing which route applies before any replacement. Listed buildings in Wales need listed building consent from the local planning authority for alterations, with Cadw guidance on historic buildings; check with the council before changing a lantern on a listed property.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Aberystwyth: questions
How do I get a price for slipped glass panel repairs in Aberystwyth?
Send a few photos of the lantern and the problem, with your Aberystwyth postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Aberystwyth
- Misted glass unit replacement in Aberystwyth
- Cracked lantern glass replacement in Aberystwyth
- uPVC roof lantern repairs in Aberystwyth
- Leak investigation and inspection in Aberystwyth
- Urgent leak make-safe in Aberystwyth
- Roof lantern replacement in Aberystwyth
Slipped glass panel repairs near Aberystwyth
More about slipped glass panel repairs · All roof lantern repairs in Aberystwyth