In Pembroke Dock, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.
Is it time for slipped glass panel repairs?
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
Why it happens
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
About Pembroke Dock and the SA72 area
Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
From Carmarthen to Pembroke Dock is roughly 29 miles — all part of the Dyfed area we cover.
If you're just outside Pembroke Dock, we also cover Milford Haven (4 miles), Haverfordwest (8 miles), Carmarthen (29 miles).
What should you expect to pay in Pembroke Dock?
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in Wales?
In Wales, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010 (as applied in Wales), so we set out the route in writing first. Listed buildings in Wales need listed building consent from the local planning authority for alterations, with Cadw guidance on historic buildings; check with the council before changing a lantern on a listed property.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Pembroke Dock: questions
Do you cover Pembroke Dock?
Yes. We cover Pembroke Dock, including the SA72 postcode area, as part of Dyfed. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Which places near Pembroke Dock do you cover?
As well as Pembroke Dock, we cover nearby Milford Haven, Haverfordwest, Carmarthen, Cardigan and the rest of Dyfed.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Pembroke Dock
- Eaves beam and gutter repairs in Pembroke Dock
- Misted glass unit replacement in Pembroke Dock
- Cracked lantern glass replacement in Pembroke Dock
- uPVC roof lantern repairs in Pembroke Dock
- Flat rooflight and skylight repairs in Pembroke Dock
- Urgent leak make-safe in Pembroke Dock
Slipped glass panel repairs near Pembroke Dock
More about slipped glass panel repairs · All roof lantern repairs in Pembroke Dock