A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Beverley (HU17) and we'll tell you which it is — with the price agreed in writing before any work.
Signs you need slipped glass panel repairs
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
Why it happens
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
About Beverley and the HU17 area
Snow and ice sitting at the eaves can block a lantern's drainage and push water back under the glass as it melts. If your lantern leaks after a thaw rather than after rain, tell us — it points to the eaves and kerb.
Near the coast, salt in the air is hard on aluminium finishes and fixings; washing the frame occasionally and touching in chips keeps corrosion away.
Close by, we also cover Hull (8 miles), Bridlington (19 miles), Scunthorpe (21 miles).
Guide prices for slipped glass panel repairs in Beverley
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Beverley: questions
Can you repair a lantern someone else installed in Beverley?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
Which places near Beverley do you cover?
As well as Beverley, we cover nearby Hull, Bridlington, Scunthorpe, Goole and the rest of East Riding of Yorkshire.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Beverley
- Flat roof junction and flashing repairs in Beverley
- Cracked lantern glass replacement in Beverley
- Opening vent and actuator repairs in Beverley
- Roof lantern respraying in Beverley
- Leak investigation and inspection in Beverley
- Urgent leak make-safe in Beverley
Slipped glass panel repairs near Beverley
More about slipped glass panel repairs · All roof lantern repairs in Beverley