We carry out slipped glass panel repairs in Bexhill-on-Sea and across the TN40 area. A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom.

Is it time for slipped glass panel repairs?
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Bexhill-on-Sea and nearby
Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
Bexhill-on-Sea is around 27 miles from Brighton, and both are within our East Sussex coverage.
Neighbouring places we cover include Hastings (5 miles), Hailsham (9 miles), Eastbourne (10 miles).
How much should it cost?
Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Bexhill-on-Sea: questions
How do I get a price for slipped glass panel repairs in Bexhill-on-Sea?
Send a few photos of the lantern and the problem, with your Bexhill-on-Sea postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Which places near Bexhill-on-Sea do you cover?
As well as Bexhill-on-Sea, we cover nearby Hastings, Hailsham, Eastbourne, Seaford and the rest of East Sussex.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Other lantern repairs in Bexhill-on-Sea
- Ridge and hip repairs in Bexhill-on-Sea
- Misted glass unit replacement in Bexhill-on-Sea
- Solar control and self-cleaning glass upgrades in Bexhill-on-Sea
- Timber roof lantern repairs in Bexhill-on-Sea
- Opening vent and actuator repairs in Bexhill-on-Sea
- Cleaning and maintenance in Bexhill-on-Sea
Slipped glass panel repairs near Bexhill-on-Sea
More about slipped glass panel repairs · All roof lantern repairs in Bexhill-on-Sea