In Harwich, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

What you might be seeing
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
About Harwich and the CO12 area
Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.
Harwich is around 38 miles from Chelmsford, and both are within our Essex coverage.
We also cover nearby Felixstowe (3 miles), Ipswich (10 miles), Clacton-on-Sea (12 miles).
How much should it cost?
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Most lantern repairs in England need no approval at all. Where a job turns into a replacement, the Building Regulations 2010 apply and we confirm how the work will be signed off before we start. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Harwich: questions
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Which places near Harwich do you cover?
As well as Harwich, we cover nearby Felixstowe, Ipswich, Clacton-on-Sea, Colchester and the rest of Essex.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Harwich
- Roof lantern resealing in Harwich
- Flat roof junction and flashing repairs in Harwich
- Cracked lantern glass replacement in Harwich
- Roof lantern respraying in Harwich
- Urgent leak make-safe in Harwich
- Orangery lantern repairs in Harwich
Slipped glass panel repairs near Harwich
More about slipped glass panel repairs · All roof lantern repairs in Harwich