A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Purley (CR8) and we'll tell you which it is — with the price agreed in writing before any work.
Signs you need slipped glass panel repairs
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
Common causes we find
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Purley and nearby
Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.
London's extensions are often tight to neighbouring walls and roofs. Where a repair needs access over a neighbour's property, we'll tell you in advance so you can arrange it.
Purley is around 11 miles from Westminster, and both are within our Greater London coverage.
We also cover nearby Coulsdon (2 miles), South Croydon (2 miles), Wallington (3 miles).
What should you expect to pay in Purley?
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Purley: questions
Do you cover Purley?
Yes. We cover Purley, including the CR8 postcode area, as part of Greater London. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Other lantern repairs in Purley
- Roof lantern resealing in Purley
- Ridge and hip repairs in Purley
- Eaves beam and gutter repairs in Purley
- Upstand and kerb repairs in Purley
- Misted glass unit replacement in Purley
- Solar control and self-cleaning glass upgrades in Purley
Slipped glass panel repairs near Purley
More about slipped glass panel repairs · All roof lantern repairs in Purley