A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Ebbw Vale (NP23) and we'll tell you which it is — with the price agreed in writing before any work.
Is it time for slipped glass panel repairs?
- A visible gap under the capping at the top of a pane
- A leak at the top of one pane only
- A pane that looks out of line with the others
Common causes we find
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
Covering Ebbw Vale and nearby
Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.
From Newport, Gwent to Ebbw Vale is roughly 16 miles — all part of the Gwent area we cover.
If you're just outside Ebbw Vale, we also cover Tredegar (2 miles), Merthyr Tydfil (8 miles), Blackwood (8 miles).
Guide prices for slipped glass panel repairs in Ebbw Vale
Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in Wales?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in Wales. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010 (as applied in Wales); we confirm in writing which route applies before any replacement. Listed buildings in Wales need listed building consent from the local planning authority for alterations, with Cadw guidance on historic buildings; check with the council before changing a lantern on a listed property.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Ebbw Vale: questions
How do I get a price for slipped glass panel repairs in Ebbw Vale?
Send a few photos of the lantern and the problem, with your Ebbw Vale postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Ebbw Vale
- Eaves beam and gutter repairs in Ebbw Vale
- Upstand and kerb repairs in Ebbw Vale
- Misted glass unit replacement in Ebbw Vale
- Condensation diagnosis and fixes in Ebbw Vale
- Opening vent and actuator repairs in Ebbw Vale
- Commercial roof lantern repairs in Ebbw Vale
Slipped glass panel repairs near Ebbw Vale
More about slipped glass panel repairs · All roof lantern repairs in Ebbw Vale