In Andover, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.
What you might be seeing
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
Covering Andover and nearby
Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.
We cover Andover as part of Hampshire, about 22 miles from Southampton.
Neighbouring places we cover include Winchester (13 miles), Newbury (15 miles), Salisbury (16 miles).
How much should it cost?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Most lantern repairs in England need no approval at all. Where a job turns into a replacement, the Building Regulations 2010 apply and we confirm how the work will be signed off before we start. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Andover: questions
Do you cover Andover?
Yes. We cover Andover, including the SP10 postcode area, as part of Hampshire. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Andover
- Upstand and kerb repairs in Andover
- Cracked lantern glass replacement in Andover
- Condensation diagnosis and fixes in Andover
- Timber roof lantern repairs in Andover
- Flat rooflight and skylight repairs in Andover
- Urgent leak make-safe in Andover
Slipped glass panel repairs near Andover
More about slipped glass panel repairs · All roof lantern repairs in Andover