ROOFLANTERNREPAIRS.co.uk
0800 088 6248 Get a guide price

Hampshire · SO45

Slipped glass panel repairs in Hythe

We cover Hythe and the wider Hampshire area for slipped glass panel repairs. In short, we lift slipped units back into place, fit proper setting blocks and stops and reseal the bars — and you know the price before any work begins.

Get a guide priceCall 0800 088 6248

In Hythe, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

What you might be seeing

  • A visible gap under the capping at the top of a pane
  • Glass edge overhanging the eaves more than its neighbours
  • A leak at the top of one pane only

Common causes we find

Missing setting blocks

Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.

Failed glass stops

Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.

About Hythe and the SO45 area

Even in drier areas, one heavy downpour with blocked eaves is enough to overflow a lantern indoors. Clearing the eaves channel is the simplest prevention there is.

Hythe is around 3 miles from Southampton, and both are within our Hampshire coverage.

We also cover nearby Southampton (3 miles), Totton (6 miles), Eastleigh (8 miles).

Guide prices for slipped glass panel repairs in Hythe

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Hythe: questions

Do you need to visit to price slipped glass panel repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Can you repair a lantern someone else installed in Hythe?

Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.

What does resetting a slipped panel cost?

Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.

Can a slipped panel be pushed back up?

Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.

Other lantern repairs in Hythe

Slipped glass panel repairs near Hythe

More about slipped glass panel repairs · All roof lantern repairs in Hythe

Call freeGuide price