We carry out slipped glass panel repairs in Portsmouth and across the PO5 area. A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom.
Is it time for slipped glass panel repairs?
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
About Portsmouth and the PO5 area
Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.
From Southampton to Portsmouth is roughly 15 miles — all part of the Hampshire area we cover.
We also cover nearby Gosport (2 miles), Fareham (5 miles), Ryde (6 miles).
Guide prices for slipped glass panel repairs in Portsmouth
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Portsmouth: questions
Do you cover Portsmouth?
Yes. We cover Portsmouth, including the PO5 postcode area, as part of Hampshire. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Can you repair a lantern someone else installed in Portsmouth?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Portsmouth
- Eaves beam and gutter repairs in Portsmouth
- Upstand and kerb repairs in Portsmouth
- Solar control and self-cleaning glass upgrades in Portsmouth
- Cleaning and maintenance in Portsmouth
- Urgent leak make-safe in Portsmouth
- Commercial roof lantern repairs in Portsmouth
Slipped glass panel repairs near Portsmouth
More about slipped glass panel repairs · All roof lantern repairs in Portsmouth