A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Inverness (IV2) and we'll tell you which it is — with the price agreed in writing before any work.
Signs you need slipped glass panel repairs
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
Roof lanterns in Inverness
Wind-driven rain is the real test of a roof lantern, and the wetter west sees plenty of it. Leaks that appear only in a storm from one direction usually point to the cappings or eaves on that face — a useful clue when you send us photos.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
We also cover nearby Dingwall (11 miles), Nairn (15 miles), Forres (24 miles).
Guide prices for slipped glass panel repairs in Inverness
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in Scotland?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in Scotland. Replacing the whole lantern or enlarging the opening is different and falls under the Building (Scotland) Regulations 2004; we confirm in writing which route applies before any replacement. Listed buildings in Scotland need listed building consent from the planning authority for alterations, with Historic Environment Scotland guidance; check before changing a lantern on a listed property.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Inverness: questions
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Which places near Inverness do you cover?
As well as Inverness, we cover nearby Dingwall, Nairn, Forres, Elgin and the rest of Highlands and Islands.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Inverness
- Glazing bar and capping repairs in Inverness
- Eaves beam and gutter repairs in Inverness
- Solar control and self-cleaning glass upgrades in Inverness
- uPVC roof lantern repairs in Inverness
- Urgent leak make-safe in Inverness
- Commercial roof lantern repairs in Inverness
Slipped glass panel repairs near Inverness
More about slipped glass panel repairs · All roof lantern repairs in Inverness