In Blyth, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

What you might be seeing
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Blyth and nearby
Freeze-thaw cycles open up tired sealant and gaskets faster than mild weather does. A spring check after a hard winter catches most problems before they leak.
Near the coast, salt in the air is hard on aluminium finishes and fixings; washing the frame occasionally and touching in chips keeps corrosion away.
We cover Blyth as part of Northumberland, about 8 miles from Morpeth.
Neighbouring places we cover include Ashington (4 miles), Cramlington (4 miles), Whitley Bay (7 miles).
How much should it cost?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Blyth: questions
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Can you repair a lantern someone else installed in Blyth?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Blyth
- Glazing bar and capping repairs in Blyth
- Ridge and hip repairs in Blyth
- Timber roof lantern repairs in Blyth
- uPVC roof lantern repairs in Blyth
- Urgent leak make-safe in Blyth
- Commercial roof lantern repairs in Blyth
Slipped glass panel repairs near Blyth
More about slipped glass panel repairs · All roof lantern repairs in Blyth