ROOFLANTERNREPAIRS.co.uk
0800 088 6248 Get a guide price

Rutland · LE15

Slipped glass panel repairs in Uppingham

For slipped glass panel repairs in Uppingham, the job is simple to describe: we lift slipped units back into place, fit proper setting blocks and stops and reseal the bars. Photos first, a guide price back, then a written fixed price.

Get a guide priceCall 0800 088 6248

In Uppingham, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

What you might be seeing

  • A visible gap under the capping at the top of a pane
  • Glass edge overhanging the eaves more than its neighbours
  • A leak at the top of one pane only

What usually causes it?

Missing setting blocks

Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.

Loose cappings

If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.

Covering Uppingham and nearby

Most inland lantern leaks aren't storm damage; they're usually tired sealant, a lifted capping or blocked eaves drainage. All three are quick to find and fix once you know where to look.

From Oakham to Uppingham is roughly 5 miles — all part of the Rutland area we cover.

If you're just outside Uppingham, we also cover Oakham (5 miles), Corby (6 miles), Stamford (11 miles).

What should you expect to pay in Uppingham?

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Uppingham: questions

Do you need to visit to price slipped glass panel repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Which places near Uppingham do you cover?

As well as Uppingham, we cover nearby Oakham, Corby, Stamford, Market Harborough and the rest of Rutland.

What does resetting a slipped panel cost?

Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.

Does a slipped panel mean my lantern was badly fitted?

Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.

Other lantern repairs in Uppingham

Slipped glass panel repairs near Uppingham

More about slipped glass panel repairs · All roof lantern repairs in Uppingham

Call freeGuide price