ROOFLANTERNREPAIRS.co.uk

Surrey · RH2

Slipped glass panel repairs in Reigate

If you're in Reigate and dealing with a slipped glass panel, we can help. We lift slipped units back into place, fit proper setting blocks and stops and reseal the bars, and confirm the fixed price in writing before we start.

A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Reigate (RH2) and we'll tell you which it is — with the price agreed in writing before any work.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

What you might be seeing

  • A visible gap under the capping at the top of a pane
  • A leak at the top of one pane only
  • A pane that looks out of line with the others

What usually causes it?

Missing setting blocks

Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.

Failed glass stops

Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.

Covering Reigate and nearby

Even in drier areas, one heavy downpour with blocked eaves is enough to overflow a lantern indoors. Clearing the eaves channel is the simplest prevention there is.

Reigate is around 16 miles from Guildford, and both are within our Surrey coverage.

We also cover nearby Redhill (2 miles), Horley (5 miles), Banstead (6 miles).

What should you expect to pay in Reigate?

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

Most lantern repairs in England need no approval at all. Where a job turns into a replacement, the Building Regulations 2010 apply and we confirm how the work will be signed off before we start. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Reigate: questions

Do you need to visit to price slipped glass panel repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Can you repair a lantern someone else installed in Reigate?

Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.

Can a slipped panel be pushed back up?

Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.

Does a slipped panel mean my lantern was badly fitted?

Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.

Other lantern repairs in Reigate

Slipped glass panel repairs near Reigate

More about slipped glass panel repairs · All roof lantern repairs in Reigate

Call freeGuide price