A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Port Talbot (SA12) and we'll tell you which it is — with the price agreed in writing before any work.
What you might be seeing
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
Common causes we find
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
About Port Talbot and the SA12 area
Damp, mild winters keep moss and algae growing on flat roofs and lantern frames, which holds water against seals and blocks weep slots. Regular clearing makes a real difference in wetter areas.
Port Talbot is around 7 miles from Swansea, and both are within our West Glamorgan coverage.
We also cover nearby Neath (5 miles), Maesteg (5 miles), Swansea (7 miles).
Guide prices for slipped glass panel repairs in Port Talbot
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in Wales?
In Wales, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010 (as applied in Wales), so we set out the route in writing first. Listed buildings in Wales need listed building consent from the local planning authority for alterations, with Cadw guidance on historic buildings; check with the council before changing a lantern on a listed property.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Port Talbot: questions
Do you cover Port Talbot?
Yes. We cover Port Talbot, including the SA12 postcode area, as part of West Glamorgan. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Which places near Port Talbot do you cover?
As well as Port Talbot, we cover nearby Neath, Maesteg, Swansea, Porthcawl and the rest of West Glamorgan.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Other lantern repairs in Port Talbot
- Roof lantern leak repairs in Port Talbot
- Glazing bar and capping repairs in Port Talbot
- Ridge and hip repairs in Port Talbot
- Misted glass unit replacement in Port Talbot
- Aluminium roof lantern repairs in Port Talbot
- uPVC roof lantern repairs in Port Talbot
Slipped glass panel repairs near Port Talbot
More about slipped glass panel repairs · All roof lantern repairs in Port Talbot