A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Pudsey (LS28) and we'll tell you which it is — with the price agreed in writing before any work.
Is it time for slipped glass panel repairs?
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
Common causes we find
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Pudsey and nearby
Western and upland parts of the UK get more rain and more wind-driven rain than the east, and that's what finds weak cappings and blocked eaves first. Lanterns here benefit from a check of the bars on the most exposed face and a clear eaves channel before winter.
Urban grime and traffic film dull glass and frames quickly; a clean and seal check makes a tired lantern look and perform much better.
Pudsey is around 5 miles from Leeds, and both are within our West Yorkshire coverage.
Neighbouring places we cover include Bradford (4 miles), Morley (5 miles), Leeds (5 miles).
How much should it cost?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Pudsey: questions
Do you cover Pudsey?
Yes. We cover Pudsey, including the LS28 postcode area, as part of West Yorkshire. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Can you repair a lantern someone else installed in Pudsey?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Pudsey
- Eaves beam and gutter repairs in Pudsey
- Flat roof junction and flashing repairs in Pudsey
- Roof lantern respraying in Pudsey
- Flat rooflight and skylight repairs in Pudsey
- Urgent leak make-safe in Pudsey
- Orangery lantern repairs in Pudsey
Slipped glass panel repairs near Pudsey
More about slipped glass panel repairs · All roof lantern repairs in Pudsey