In Redditch, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

What you might be seeing
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
Common causes we find
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Redditch and nearby
Leaf fall from garden trees is the most common cause of eaves overflow on suburban extensions. If your lantern sits near trees, clearing the eaves channel each autumn prevents a lot of drips.
From Worcester to Redditch is roughly 14 miles — all part of the Worcestershire area we cover.
Close by, we also cover Bromsgrove (5 miles), Shirley (9 miles), Droitwich (9 miles).
How much should it cost?
Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Most lantern repairs in England need no approval at all. Where a job turns into a replacement, the Building Regulations 2010 apply and we confirm how the work will be signed off before we start. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Redditch: questions
How do I get a price for slipped glass panel repairs in Redditch?
Send a few photos of the lantern and the problem, with your Redditch postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Can you repair a lantern someone else installed in Redditch?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Other lantern repairs in Redditch
- Ridge and hip repairs in Redditch
- Upstand and kerb repairs in Redditch
- Solar control and self-cleaning glass upgrades in Redditch
- Condensation diagnosis and fixes in Redditch
- Opening vent and actuator repairs in Redditch
- Urgent leak make-safe in Redditch
Slipped glass panel repairs near Redditch
More about slipped glass panel repairs · All roof lantern repairs in Redditch