A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Broadstairs (CT10) and we'll tell you which it is — with the price agreed in writing before any work.
What you might be seeing
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
What usually causes it?
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
Roof lanterns in Broadstairs
Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.
Near the coast, salt in the air is hard on aluminium finishes and fixings; washing the frame occasionally and touching in chips keeps corrosion away.
Broadstairs is around 40 miles from Maidstone, and both are within our Kent coverage.
We also cover nearby Ramsgate (2 miles), Margate (3 miles), Deal (9 miles).
What should you expect to pay in Broadstairs?
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Broadstairs: questions
Do you cover Broadstairs?
Yes. We cover Broadstairs, including the CT10 postcode area, as part of Kent. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Broadstairs
- Eaves beam and gutter repairs in Broadstairs
- Flat roof junction and flashing repairs in Broadstairs
- Misted glass unit replacement in Broadstairs
- Condensation diagnosis and fixes in Broadstairs
- Timber roof lantern repairs in Broadstairs
- Aluminium roof lantern repairs in Broadstairs
Slipped glass panel repairs near Broadstairs
More about slipped glass panel repairs · All roof lantern repairs in Broadstairs