Slipped glass panel repairs in Kent

A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. We carry out slipped glass panel repairs across Kent, with a guide price from your photos and a fixed price in writing before any work starts.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

Signs you need slipped glass panel repairs

Glass edge overhanging the eaves more than its neighbours
A leak at the top of one pane only
A pane that looks out of line with the others

What usually causes it?

Failed glass stops

Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.

Loose cappings

If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.

Roof lanterns in Kent

Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.

Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.

What should you expect to pay for slipped glass panel repairs in Kent?

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

Send photosWhatsApp or upload a few photos and tell us when it leaks.
Guide priceWe reply with a guide price and whether a visit is needed.
Fixed price in writingYou approve the price and the date before anything starts.
Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Kent: questions

Can a slipped panel be pushed back up?

Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.

Does a slipped panel mean my lantern was badly fitted?

Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.

Which towns in Kent do you cover?

All of Kent, including Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Margate. Rural and remote addresses are covered by arrangement.

How do I get a price for slipped glass panel repairs in Kent?

Send a few photos of the lantern and the problem with your postcode, by WhatsApp or the form. We reply with a guide price and confirm the fixed price in writing before any work starts.

Other repairs in Kent

Nearby areas

More about slipped glass panel repairs · All roof lantern repairs in Kent