In Chatham, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.
Is it time for slipped glass panel repairs?
- A visible gap under the capping at the top of a pane
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
Covering Chatham and nearby
Drier, sunnier parts of the UK are kinder to seals than the wet west, but strong sun ages sealant, gaskets and plastic end caps, and south- or west-facing lanterns can make rooms very warm. Solar control glass and an opening vent help.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
From Maidstone to Chatham is roughly 8 miles — all part of the Kent area we cover.
If you're just outside Chatham, we also cover Gillingham (1 mile), Rochester (1 mile), Strood (2 miles).
Guide prices for slipped glass panel repairs in Chatham
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Chatham: questions
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Which places near Chatham do you cover?
As well as Chatham, we cover nearby Gillingham, Rochester, Strood, Maidstone and the rest of Kent.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Other lantern repairs in Chatham
- Roof lantern resealing in Chatham
- Glazing bar and capping repairs in Chatham
- uPVC roof lantern repairs in Chatham
- Opening vent and actuator repairs in Chatham
- Urgent leak make-safe in Chatham
- Commercial roof lantern repairs in Chatham
Slipped glass panel repairs near Chatham
More about slipped glass panel repairs · All roof lantern repairs in Chatham