ROOFLANTERNREPAIRS.co.uk
0800 088 6248 Get a guide price

Powys · LD3

Slipped glass panel repairs in Brecon

Dealing with a slipped glass panel in Brecon (LD3)? We lift slipped units back into place, fit proper setting blocks and stops and reseal the bars, with a fixed price agreed in writing first.

Get a guide priceCall 0800 088 6248

In Brecon, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

What you might be seeing

  • A visible gap under the capping at the top of a pane
  • Glass edge overhanging the eaves more than its neighbours
  • A pane that looks out of line with the others

What usually causes it?

Failed glass stops

Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.

Loose cappings

If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.

About Brecon and the LD3 area

Damp, mild winters keep moss and algae growing on flat roofs and lantern frames, which holds water against seals and blocks weep slots. Regular clearing makes a real difference in wetter areas.

From Newtown to Brecon is roughly 40 miles — all part of the Powys area we cover.

If you're just outside Brecon, we also cover Tredegar (13 miles), Merthyr Tydfil (14 miles), Ebbw Vale (14 miles).

How much should it cost?

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in Wales?

Most lantern repairs in Wales need no approval at all. Where a job turns into a replacement, the Building Regulations 2010 (as applied in Wales) apply and we confirm how the work will be signed off before we start. Listed buildings in Wales need listed building consent from the local planning authority for alterations, with Cadw guidance on historic buildings; check with the council before changing a lantern on a listed property.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Brecon: questions

Do you cover Brecon?

Yes. We cover Brecon, including the LD3 postcode area, as part of Powys. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.

How do I get a price for slipped glass panel repairs in Brecon?

Send a few photos of the lantern and the problem, with your Brecon postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.

What does resetting a slipped panel cost?

Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.

Does a slipped panel mean my lantern was badly fitted?

Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.

Other lantern repairs in Brecon

Slipped glass panel repairs near Brecon

More about slipped glass panel repairs · All roof lantern repairs in Brecon

Call freeGuide price