In Ryde, as everywhere, timber roof lanterns are beautiful and repairable, but they need sound paint, sound beads and dry timber. Send photos and we'll tell you what we think has failed.
Signs you need timber roof lantern repairs
- Flaking or blistered paint on bars or eaves
- Putty or beads cracking and lifting
- Leaks at bar joints
Common causes we find
Paint failure
Once the paint film breaks, water gets into the end grain and joints.
No maintenance
Timber needs redecorating on a cycle; skipped cycles turn small repairs into big ones.
Roof lanterns in Ryde
Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
We cover Ryde by arrangement: island work is planned around ferry access, and any travel or access costs are set out in your written quote before you commit.
Close by, we also cover Gosport (5 miles), Sandown (5 miles), Portsmouth (6 miles).
What should you expect to pay in Ryde?
Guide price for timber roof lantern repairs: £395–£1,995 ex VAT (£474–£2,394 inc VAT), per lantern. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Timber roof lantern repairs in Ryde: questions
How do I get a price for timber roof lantern repairs in Ryde?
Send a few photos of the lantern and the problem, with your Ryde postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Can you repair a lantern someone else installed in Ryde?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
Do you work on listed buildings?
Yes. Listed building consent may be needed for changes; like-for-like repair is generally treated differently from alteration, but check with your council's conservation officer before work.
How often does a timber lantern need painting?
It depends on exposure and paint system; many need redecorating every five to eight years.
Other lantern repairs in Ryde
- Roof lantern leak repairs in Ryde
- Upstand and kerb repairs in Ryde
- Flat roof junction and flashing repairs in Ryde
- Solar control and self-cleaning glass upgrades in Ryde
- uPVC roof lantern repairs in Ryde
- Urgent leak make-safe in Ryde
Timber roof lantern repairs near Ryde
More about timber roof lantern repairs · All roof lantern repairs in Ryde