We carry out slipped glass panel repairs in Burgess Hill and across the RH15 area. A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom.
Is it time for slipped glass panel repairs?
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Burgess Hill and nearby
Even in drier areas, one heavy downpour with blocked eaves is enough to overflow a lantern indoors. Clearing the eaves channel is the simplest prevention there is.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
From Chichester to Burgess Hill is roughly 29 miles — all part of the West Sussex area we cover.
We also cover nearby Haywards Heath (3 miles), Hove (9 miles), Brighton (9 miles).
How much should it cost?
Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Burgess Hill: questions
Do you cover Burgess Hill?
Yes. We cover Burgess Hill, including the RH15 postcode area, as part of West Sussex. Send photos by WhatsApp or the form for a free guide price, and we'll confirm the fixed price in writing before any work starts.
Can you repair a lantern someone else installed in Burgess Hill?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Other lantern repairs in Burgess Hill
- Glazing bar and capping repairs in Burgess Hill
- Upstand and kerb repairs in Burgess Hill
- Cracked lantern glass replacement in Burgess Hill
- uPVC roof lantern repairs in Burgess Hill
- Flat rooflight and skylight repairs in Burgess Hill
- Urgent leak make-safe in Burgess Hill
Slipped glass panel repairs near Burgess Hill
More about slipped glass panel repairs · All roof lantern repairs in Burgess Hill