We carry out slipped glass panel repairs in Haywards Heath and across the RH16 area. A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom.

Is it time for slipped glass panel repairs?
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
Why it happens
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Loose cappings
If the capping no longer clamps the glass firmly, the unit can creep with thermal movement.
Roof lanterns in Haywards Heath
Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.
Near the coast, salt in the air is hard on aluminium finishes and fixings; washing the frame occasionally and touching in chips keeps corrosion away.
From Chichester to Haywards Heath is roughly 32 miles — all part of the West Sussex area we cover.
Close by, we also cover Burgess Hill (3 miles), Crawley (9 miles), East Grinstead (10 miles).
Guide prices for slipped glass panel repairs in Haywards Heath
Typical range: £195–£445 ex VAT, which is £234–£534 with VAT, per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Haywards Heath: questions
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Can you repair a lantern someone else installed in Haywards Heath?
Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Haywards Heath
- Eaves beam and gutter repairs in Haywards Heath
- Misted glass unit replacement in Haywards Heath
- Aluminium roof lantern repairs in Haywards Heath
- uPVC roof lantern repairs in Haywards Heath
- Orangery lantern repairs in Haywards Heath
- Commercial roof lantern repairs in Haywards Heath
Slipped glass panel repairs near Haywards Heath
More about slipped glass panel repairs · All roof lantern repairs in Haywards Heath