ROOFLANTERNREPAIRS.co.uk
0800 088 6248 Get a guide price

East Sussex · BN3

Slipped glass panel repairs in Hove

We cover Hove and the wider East Sussex area for slipped glass panel repairs. In short, we lift slipped units back into place, fit proper setting blocks and stops and reseal the bars — and you know the price before any work begins.

Get a guide priceCall 0800 088 6248

We carry out slipped glass panel repairs in Hove and across the BN3 area. A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom.

Roof lantern glass panel slipped down past the eaves leaving a gap beneath the glazing bar

What you might be seeing

  • A visible gap under the capping at the top of a pane
  • Glass edge overhanging the eaves more than its neighbours
  • A leak at the top of one pane only

Why it happens

Missing setting blocks

Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.

Failed glass stops

Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.

Roof lanterns in Hove

Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.

Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.

Hove is around 1 mile from Brighton, and both are within our East Sussex coverage.

If you're just outside Hove, we also cover Brighton (1 mile), Burgess Hill (9 miles), Worthing (9 miles).

How much should it cost?

Guide price, per panel£195–£445 ex VAT£234–£534 inc VAT

Guide price for slipped glass panel repairs: £195–£445 ex VAT (£234–£534 inc VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.

Do you need permission in England?

Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.

How does it work?

  1. Send photosWhatsApp or upload a few photos and tell us when it leaks.
  2. Guide priceWe reply with a guide price and whether a visit is needed.
  3. Fixed price in writingYou approve the price and the date before anything starts.
  4. Repair and testWe fix what's failed, water-test where it matters, and send photos.

Slipped glass panel repairs in Hove: questions

Do you need to visit to price slipped glass panel repairs?

Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.

Can you repair a lantern someone else installed in Hove?

Yes. We repair lanterns whoever fitted them. If yours is still under the installer's warranty, contact them first so you don't affect it.

What does resetting a slipped panel cost?

Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.

Does a slipped panel mean my lantern was badly fitted?

Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.

Other lantern repairs in Hove

Slipped glass panel repairs near Hove

More about slipped glass panel repairs · All roof lantern repairs in Hove

Call freeGuide price