A slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos from Brighton (BN2) and we'll tell you which it is — with the price agreed in writing before any work.

Signs you need slipped glass panel repairs
- Glass edge overhanging the eaves more than its neighbours
- A leak at the top of one pane only
- A pane that looks out of line with the others
What usually causes it?
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
Covering Brighton and nearby
Even in drier areas, one heavy downpour with blocked eaves is enough to overflow a lantern indoors. Clearing the eaves channel is the simplest prevention there is.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
If you're just outside Brighton, we also cover Hove (1 mile), Burgess Hill (9 miles), Worthing (10 miles).
How much should it cost?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
In England, like-for-like repairs to a roof lantern don't usually involve building control. A full replacement or a bigger opening is controlled under the Building Regulations 2010, so we set out the route in writing first. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Brighton: questions
How do I get a price for slipped glass panel repairs in Brighton?
Send a few photos of the lantern and the problem, with your Brighton postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Do you need to visit to price slipped glass panel repairs?
Not always. Clear photos are often enough for a guide price. Where the cause isn't obvious, a visit to inspect and water-test is charged from £145 ex VAT, confirmed before we come.
Can a slipped panel be pushed back up?
Not safely without removing the capping. The fix is to support the unit properly so it can't slip again.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Brighton
- Roof lantern leak repairs in Brighton
- Upstand and kerb repairs in Brighton
- Aluminium roof lantern repairs in Brighton
- Urgent leak make-safe in Brighton
- Roof lantern replacement in Brighton
- Orangery lantern repairs in Brighton
Slipped glass panel repairs near Brighton
More about slipped glass panel repairs · All roof lantern repairs in Brighton