In Worthing, as everywhere, a slipped panel is a glass unit that has slid down its glazing bars, leaving a gap at the top and often pushing past the eaves at the bottom. Send photos and we'll tell you what we think has failed.
What you might be seeing
- A visible gap under the capping at the top of a pane
- Glass edge overhanging the eaves more than its neighbours
- A pane that looks out of line with the others
Why it happens
Missing setting blocks
Blocks under the bottom edge carry the weight of the unit; if they're missing or crushed, the unit creeps down.
Failed glass stops
Many systems use an end stop at the eaves. If it's missing or broken, nothing holds the glass in place.
About Worthing and the BN11 area
Sun and UV do more damage than rain on many lanterns here: brittle ridge caps, chalky finishes and hardened gaskets. They're cheap to replace before they let water in.
Coastal wind drives rain hard against lanterns, so cappings and ridge seals on the seaward face take the most punishment.
From Chichester to Worthing is roughly 18 miles — all part of the West Sussex area we cover.
Neighbouring places we cover include Littlehampton (7 miles), Hove (9 miles), Brighton (10 miles).
What should you expect to pay in Worthing?
Most slipped glass panel repairs jobs come in between £195 and £445 ex VAT (£234–£534 including VAT), per panel. Towers or scaffold, where needed, are priced into the quote. Your fixed price is confirmed in writing before any work starts.
Do you need permission in England?
Straightforward repairs — resealing, gaskets, cappings, eaves and like-for-like parts — don't normally need building regulations approval in England. Replacing the whole lantern or enlarging the opening is different and falls under the Building Regulations 2010; we confirm in writing which route applies before any replacement. Listed buildings need listed building consent from the local council for alterations, and conservation areas can have extra controls; like-for-like repairs are treated differently from changes, so check with the council's conservation officer first.
How does it work?
- Send photosWhatsApp or upload a few photos and tell us when it leaks.
- Guide priceWe reply with a guide price and whether a visit is needed.
- Fixed price in writingYou approve the price and the date before anything starts.
- Repair and testWe fix what's failed, water-test where it matters, and send photos.
Slipped glass panel repairs in Worthing: questions
How do I get a price for slipped glass panel repairs in Worthing?
Send a few photos of the lantern and the problem, with your Worthing postcode. We'll reply with a guide price and tell you whether a visit is needed before we can fix the price.
Which places near Worthing do you cover?
As well as Worthing, we cover nearby Littlehampton, Hove, Brighton, Bognor Regis and the rest of West Sussex.
What does resetting a slipped panel cost?
Usually £195–£445 ex VAT per panel, confirmed in writing before work starts. If the unit is damaged it may need replacing.
Does a slipped panel mean my lantern was badly fitted?
Not necessarily — blocks can crush and stops can break over time — but if the lantern is new, talk to the installer first as it may be under warranty.
Other lantern repairs in Worthing
- Roof lantern resealing in Worthing
- Ridge and hip repairs in Worthing
- Upstand and kerb repairs in Worthing
- Flat roof junction and flashing repairs in Worthing
- Urgent leak make-safe in Worthing
- Roof lantern replacement in Worthing
Slipped glass panel repairs near Worthing
More about slipped glass panel repairs · All roof lantern repairs in Worthing